BAKL40T12AA
Edition: 02.03.2017
Page: 7/11
4.1.1. Auto-test
If voltage supply to unit is interrupted, unit starts a self test immediately after reset. Here all entranc-
es and exits are controlled:
Process of auto test will be show at the display:
1. Indication of all LED’s and display indication
-88
2. Indication Software version:
03
3. Indication Configuration (DIP-Code, for example:) 08
4. Indication of auto-test code
01, 02... etc.
After self-test, the actual temperature can be read on display.
5.
Operation
Danger of accident!
–
Focussing your attention on the road traffic is of top priority
–
Only operate your air conditioning unit when the traffic situation allows it
–
Make sure you can clearly recognize and read all operation- and display-elements at any time
–
Protect all displays against irritating sunglare and any other optical disturbances
–
Please note that the control panel keys have not been designed for heavy stressing
–
Excessive or fast pressing of the keys for adjusting the set temperature does not accelerate the
cooling down process. It possibly damages the control panel and so affects the general perfor-
mance of the air conditioning unit
5.1.
Operation panel / function of the keys
Short.
Function
D1
3-figure display
S1
required
room temperature
can be adjusted (increase) 16 to 28°C
S2
required
room temperature
can be adjusted (decrease) 16 to 28°C
S3
required
air volume
can be adjusted (increase), step 1 or 2 (resp. stepless adjustment)
S4
required
air volume
can be adjusted (decrease), step 1 or 2 (resp. stepless adjustment)
S5
A/C automatic
(A/C ON/OFF)
S6
Recirculated Air operation
Close resp. Open. Recirculated air flap; in case of
closed recirculated air flap
,
LED
inside key
button
is indicating
.
S1
D1
S3
S5
S2
S4
S6
