BAKL30T12AC
Edition: 02.03.2017
Page: 4/11
Information on the operating instructions
These operating instructions are valid for the
a/c-units
type
:
•
KL30/12V
•
KL30T/12V
•
KL30/24V
•
KL30T/24V
We recommend that you supplement the paperwork with the following data when starting up
the unit. This will also be helpful for ordering replacement parts.
Air-conditioning unit series no:
...........................................
Order no:
..........................................
Year of construction:
.................. / .............. .................
(MM/YY)
Start-up on:
.................. / .............. /.................
(DD/MM/YY)
The machine is in accordance with the EC machinery directive 2006/42/EC.
The unit contains or needs fluorinated greenhouse gas for operation and is subject
to identification requirements in accordance with F-Gas Regulation 517/2014.
Due to the fact that scope of supply depends on the order, equipment of your product may
differ in some parts of description.
In case your product is equipped with details not shown or described in the operating in-
struction, your KONVEKTA -Service-Station will always be at disposal for informing you
about correct operation.
In the course of further developments we reserve the right to technical modifications without preno-
tice. Guarantee and liability conditions of
KONVEKTA AG
’s general business conditions are not
enlarged
by the above notes.
Indications and photos should neither be copied and circulated nor used for competitor’s purposes.
All rights according to the copyright remain expressly reserved.
Manufacturer: KONVEKTA AG, Postfach 2280, D-34607 Schwalmstadt
Important!
The heating water/glycol must contain anti-freeze (adjust the mix ratio according to the supplier’s
instructions) for machines/vehicles which are equipped with a heating/air-conditioning unit. This is
necessary so that the heating thermal exchanger does not freeze during air-conditioning functions!
(Standard anti-freeze filled by the vehicle manufacturer is up to –40°C.)
