Kontron SBC-845D-VEA, User Manual

Page: 60 / 131

Overview 3-3 SBC-845D-VEA Single Board Computer User’s Guide
Sys
te
m
I
n
st
allati
on
ä
ä ä
ä
Overview
This chapter provides instructions to install and configure the SBC-845D-VEA single board
computer. Additional information is enclosed to help you install M-systems Flash disk, set up the
onboard PCI device and handle WDT operation in software programming.
ä ä ä ä
Pentium 4 Processor
ä ä ä ä
Installing 478-pin CPU
1) Lift the CPU socket lever outwards and upwards to the other end.
2) Align the processor pins with pinholes on the socket. Make sure that the notched corner
(pin 1) of the CPU corresponds to the socket’s bevel end. Then press the CPU gently until
it fits into place. If this operation is not easy or smooth, don’t do it forcibly. Check the
alignment and try again.
3) Push down the lever to lock the processor into the socket once the it is in position.
4) Follow the installation guide that came with your cooling fan or heat sink to mount it on
CPU surface and lock it on the socket 478.
ä ä ä ä
Removing CPU
1) Unlock the cooling fan first.
2) Lift the lever of CPU socket outwards and upwards to the other end.
3) Carefully lift up the existing CPU to remove it from the socket.
4) Push down the lever of the CPU socket to close the opened socket.