Kontron SBC-845D-VEA, User Manual

Page: 103 / 131

4-32
SBC-845D-VEA Single Board Computer User’s Guide
ä ä ä ä
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration
Data (ESCD) when you exit Setup if you have installed a new add-on card and the system
reconfiguration has caused such a serious conflict that the operating system can not boot.
The choice: Enabled, Disabled .
ä ä ä ä
Resource controlled by
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug
and Play compatible devices. However, this capability means absolutely nothing unless you are
using a Plug and Play operating system such as Windows

95. If you set this field to “manual”
choose specific resources by going into each of the sub menu that follows this field (a sub menu
is preceded by a “
Ø ”).
The choice: Auto (ESCD), Manual.
ä ä ä ä
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on the
type of device using the interrupt.
The choice: Enter for more options
ä ä ä ä
PCI/VGA Palette Snoop
Leave this field at Disabled
.
The choices : Enabled/Disabled.
ä ä ä ä
Assign IRQ For VGA
To enable VGA IRQ assignation by selecting enabled.
The choices : Enabled/Disabled.