Kontron SBC-845D-VEA, User Manual

Page: 119 / 131

4-48
SBC-845D-VEA Single Board Computer User’s Guide
Code Description
08h Test special keyboard controller for Winbond 977 series Super I/O chips.
Enable keyboard interface.
09h Reserved
0Ah Disable PS/2 mouse interface (optional). Auto detect ports for keyboard &
mouse followed by a port & interface swap (optional). Reset keyboard for
Winbond 977 series Super I/O chips.
0Bh Reserved
0Ch Reserved
0Dh Reserved
0Eh Test F000h segment shadow to see whether it is R/W-able or not. If test
fails, keep beeping the speaker.
0Fh Reserved
10h Auto detect flash type to load appropriate flash R/W codes into the run time
area in F000 for ESCD & DMI support.
11h Reserved
12h Use walking 1’s algorithm to check out interface in CMOS circuitry. Also set
real-time clock power status, and then check for override.
13h Reserved
14h Program chipset default values into chipset. Chipset default values are
MODBINable by OEM customers.
15h Reeserved
16h Initial Early_Init_Onboard_Generator switch.
17h Reserved
18h Detect CPU information including brand, SMI type (Cyrix or Intel) and CPU
level (586 or 686).
19h Reserved
1Ah Reserved