R4U8S User's Manual
Preparing Before Using
Page 8
SD.DT.F06-1e
Chapter 3 -
Preparing Before Using
3.1
Receipt of the Equipment
3.1.1
Checking the Packages
Inspecting the packages and verifying their condition is the responsability of the customer and should be carried
out upon delivery.
>
Inspect the cartons and check their condition:
4
no broken corners,
4
general state of the case (no rips or holes),
4
condition of the bands and the clips.
>
If you wish to report any damage in transit, you should make out a full report, and also note the damage on
the packing list that accompanies the equipment. Ensure that the report and the packing list are signed by
yourself and also by the transport agent, and send a copy of these documents to:
4
the transport company,
4
Kontron.
3.1.2
Unpacking
Unpacking the equipment must be carried out under the supervision of a technician approved by
Kontron.
>
Open each of the packages and take out the items one by one.
Two people should assist in the unpacking of the system unit and the monitor, as these items may be
heavy.
>
Inspect each item and make a note of any possible defects (scratches, marks or blemishes on the monitor
screen, damaged cables, etc.). If necessary, make a report of any damage or defects.
>
Check the equipment against the packing list and report any missing items.
It is recommended that you keep the cartons and the anti-shock protection. This will be required if you
decide to move your system or rack to a different site.
The rack is delivered inside a protective film. Make sure to remove this protective film before starting the
system; otherwise that could damage the system.
