Safety Instructions
6
MBx406 – 4U Platform User Manual
Safety Instructions
Please read this section carefully and observe the instructions for your own safety
and correct use of the device.
The chapter also contains information on approval and interference suppression
of your system.
Observe the warnings and instructions on the device and in the manual.
The MBx406 is built and tested by Kontron Embedded Computers in accordance
with EN60950/VDE0805 and left the works in a perfectly safe condition.
In order to maintain this condition and ensure safe operation, the user must
observe the instructions and warnings contained in this manual.
q
The device must be used in accordance with the instructions for use.
q
The electrical installations in the room must correspond to the requirements of
the respective regulations.
q
Take care that there are no cables, particularly power cables, in areas where
persons can trip over them.
q
Do not use power cable in sockets shared by a number of other power
consumers. Do not use an extension cable.
q
The unit is not completely disconnected from the power source by turning off
the power on/off button.
The unit is complete disconnected from the power source, only when the
power cord is disconnected either from the power source or from the unit.
Therefore the power cord and its connectors must always remain easily
accessible.
q
Only use the power cord supplied.
q
Do not set up the device in the proximity of heat sources or in a damp
location. Make sure the device has adequate ventilation.