manualshive.com logo in svg

Kontron MBx406, User Manual, Page: 13 / 42

Share
Download
Kontron MBx406 User Manual Download Page 13

Product Description

12

MBx406 – 4U Platform User Manual

Product Description

The MBx406 is a feature-packed 4U (19") system, designed for high-performance
applications. The MBx406 – 4U Platform is designed as a rackmount device. It
includes a motherboard with 32-bit PCI/ISA/AGP design slots.

The System is equipped with three front accessible drive bays (one 3,5” and two
5,25” bays).

The operating elements are located behind the drive door and consist of the
“Power Switch” and the “Reset Button” for the standard configuration.

The indicator LEDs are located on the right side of the left handle; for the
standard version these are composed of the “power LED” and “hard disk activity
LED”.

The unit incorporates E-PAC

®

 technology to simplify the installation and the

removal of its components (HDD, FDD or CD-ROM-drive). The front side cooling

fans are mounted into E-PAC

®

 .This advanced technology is also extreme

resistant to shock and vibrations and a definite air stream for the system cooling.

The washable air filter mat, located in the front of the unit, protects your system
against dust . It is changeable while the MBx406 –4U Platform is powered-up.

On the right side of the device there are the type label and the approval marks.

Fig 2: MBx406 – 4U Platform

Summary of Contents for MBx406











































Reviews:

No comments