6. Product Description
KISS 4U KTC5520 – User's Guide (Version 1.01)
The power button of the KISS 4U KTC5520 platform and a SYSID button are located on the front side behind the front
access panel. On the front side are available a “power LED”, a “hard disk activity LED” and five LEDs for system
monitoring.
Two USB ports are available on the front side of the system.
Three system fans are installed at the front side of the unit. These are attached to the system by means of a fan slide-in
module. The fan slide-in module simplifies the installation and removal of these components, even during operation.
The washable filter mat, which protects your system against dust and dirt, is located on the front side of the system. This
filter mat may be replaced during operation.
The type label is attached to the right side of the device.
The KISS 4U KTC5520 platform may only be operated in horizontal position (rack and desktop version) or
in vertical position (tower version).
If you operate the KISS 4U KTC5520 platform in vertical position, please observe that the system fans
(slide-in module) must be to the lower front and the drives to the upper front of the system.
When powering on the KISS 4U KTC5520 system, make sure that the air intake and exhaust openings are
not obstructed by objects.
12
www.kontron.com