FusionView – User Guide
Doc-Rev.: 1.1
www.kontron.com
// 33
Do not use a hard or a pointed object (like screw driver) to operate the touch screen, since it
can damage the touch screen surface and can disturb the touch screen functionality. If any
stylus is used make sure it is proper for PCAP sensitive surface.
The touch screen is covered with an anti-glare glass panel and care should be taken when
cleaning it (see section “Touch Screen Care and Cleaning”)
4.2.3.
RFID Card Reader (Option)
Your FusionView can optionally be equipped with a contactless RFID card reader. It is designed for reading chip data
from electronic cards and documents (contactless reading of RFID data). The data between the HF-mPCIe RFID reader
and a host system are transmitted via a USB COM port emulation.
The transponder is readable over the whole operation distance between reader antenna and the specified maximum
read distance. For technical specifications, refer to section 3.7.
Depending on your application installed the RFID card reader allows reading of chip cards for authentication functions
or for services that requires user-specific authorizations (for access rights control).