FusionView – User Guide
Doc-Rev.: 1.1
www.kontron.com
// 32
4.2.
Front View
Figure 22: Front view of FusionView SD
1.
TFT display with touch screen
and full glass front
2.
Buttons for Power and Setup
3.
RFID reader location (optional)
Detail: enlarged RFID logo
4.2.1.
Front Side
The front side of the FusionView system consists of a continuous glass front (Figure 22, pos.3), the display with the
integrated projected capacitive touch screen and the anti-glare glass plate (Figure 22, pos.2).
4.2.2.
Display with Touch Screen
Depending on the FusionView system ordered, the built-in display is a 12.1", 15.6", 18.5" or 21.5" size TFT display with
corresponding Projected Capacitive (PCAP) touch screen. The touch screen is USB connected. The surface of each
display size is also mechanical protected through an appropriate anti-glare glass plate.
The glass plate provides physical and chemical properties to protect against accidental damage to the display during
field applications such as accidental drops or scratches with tools.
The integrated touch screen registers contacts of fingers and allows the user to operate the system without a
keyboard or a pointing device. The implemented touch technology allows 10-touch operations with fingers or thin
gloves.
For technical specification of the built-in display and touch screen refer to chapter 3/ “Technical Data”.
1
2
3