Software Setups
4.5
4.1.4 Standard CMOS Setups
Function
Description
Date/Time
The current values for each category are displayed. Enter new values through the
keyboard.
Hard Disks
Two IDE controllers are defined on the cPCI-MXS64GX board. The Primary and
Secondary controllers can both have two disks: Master Disk or Slave Disk.
Only three settings are available for the hard disk type: Auto, User and None. Type 1
to 46 are not predefined in the system: Use auto-detect or enter the parameters for
the type in the user-defined.
Drive A / Drive B
Select the type of floppy disk installed for drive A and drive B.
Video
This option specifies the basic type of display adapter card installed in the system.
Halt on
This option specifies the type of errors that will stop the system during the BIOS
booting procedure. A message asks that you press F1 to continue or press the
DELETE key to enter Setup. The settings are: All errors, No errors, All but keyboard,
All but diskette, and All but disk/key (default setting).
Memory
This display-only option indicates the amount of Base, Extended and other types of
memory installed in the system.
4.1.5 Saving & Exiting Operations
Use one of the following options available from the Main Menu:
Function
Description
Save & Exit
After having modified the BIOS Setup, you can save the configuration in CMOS
RAM and the Flash BIOS, by selecting this option.
Exit Without Saving
This option is used to exit AWARD Setup without saving the configuration to CMOS
RAM or Flash BIOS.
Summary of Contents for cPCI-MXS64GX
Page 70: ...cPCI MXS64GX Technical Reference Manual 3 26 1 Rev...
Page 82: ...4 SOFTWARE SETUPS 1 BIOS SETUP PROGRAM 2 VT100 MODE 4 PART...
Page 108: ...D 1 D BOARD DIAGRAMS D 1 TOP DEVICES SURFACE MOUNT...
Page 109: ...cPCI MXS64GX Technical Reference Manual D 2 D 2 ASSEMBLY BOTTOM DIAGRAM...
