cPCI-MXS64GX Technical Reference manual
1.6
1.4.
INTERFACING WITH THE ENVIRONMENT
1.4.1. CPCI
The cPCI-MXS64GX system processor is provided for rack-mounted systems to offer the
highest modularity. Through the J1/J2 segment, the board can drive up to seven external
CompactPCI slots, supporting individual REQ/GNT arbitration pair signals and clock.
✎
NOTE
All I/O signals are available in front I/O and rear I/O configuration.
A. In front I/O configuration, the following I/Os signals are available on
the faceplate: SVGA, Serial Port 1, Ethernet 1 and 2, keyboard and
mouse. All other I/Os are connected to J3-J5.
B. In Rear I/O configuration, all I/O signals are connected to J3-J5
A backplane dedicated to the cPCI-MXS64GX is provided by Kontron
and is referred to as cBP08R, CPCI Passive Backplane.
1.4.2. Mezzanine
The mezzanine is a hardware interface concept introduced by Kontron to increase the I/O
connectivity of the cPCI-MXS64GX, but respecting the dual slot 6U form factor restrictions.
The onboard mezzanine connector features PCI bus, IDE, floppy, keyboard and mouse
signals, for potential mezzanine applications: Kontron provides an optional storage
mezzanine composed with a hard drive, a floppy disk drive.
✎
Note
A bridge can be added on the mezzanine to support 7 extra slots. These slots
support HA CPCI I/O boards
A complete
CompactPCI
development system CxP-0816 is also available from Kontron.
Summary of Contents for cPCI-MXS64GX
Page 70: ...cPCI MXS64GX Technical Reference Manual 3 26 1 Rev...
Page 82: ...4 SOFTWARE SETUPS 1 BIOS SETUP PROGRAM 2 VT100 MODE 4 PART...
Page 108: ...D 1 D BOARD DIAGRAMS D 1 TOP DEVICES SURFACE MOUNT...
Page 109: ...cPCI MXS64GX Technical Reference Manual D 2 D 2 ASSEMBLY BOTTOM DIAGRAM...
