Kontron cPCI-MXS64GX, Technical Reference Manual

Page: 62 / 135

cPCI-MXS64GX Technical Reference Manual
3.18
The recommended DIMM devices are listed in the table below.
Vendor’s part number DIMM’s description Vendor’s Name
CTK32M/P100S ECC SDRAM 32MB 4M*72 PC100 1.15"HT CENTON
4X72CQ2X8S4E ECC SDRAM 32MB 4M*72 PC100 1.15"HT ROCKY MOUNTAIN RAM
DIM-200472V2S08G1 ECC SDRAM 32MB 4M*72 PC100 1.15"HT SHIKATRONICS
DIM200472V5S08G ECC SDRAM 32MB 4M*72 PC100 1.15"HT SHIKATRONICS
CTK64M/P100S ECC SDRAM 64MB 8M*72 PC100 1.15"HT CENTON
8X72PC8X8S4E ECC SDRAM 64MB 8M*72 PC100 1.15"HT ROCKY MOUNTAIN RAM
DIM200872V4S8G1 ECC SDRAM 64MB 8M*72 PC100 1.15"HT SHIKATRONICS
CTK128M/P100S ECC SDRAM 128MB 16M*72 PC100 1.15" CENTON
DIM-201672V4S08G1 ECC SDRAM 128MB 16M*72 PC100 1.15" SHIKATRONICS
VM374S1723-GL ECC SDRAM 128MB 16M*72 PC100 1.15" VIRTIUM
CFHKQARV4VU420G ECC SDRAM 256MB 32M*72 PC100 1.15" CENTON
CTK256M/P100S ECC SDRAM 256MB 32M*72 PC100 1.15" CENTON
DIM203272VDS08GS ECC SDRAM 256MB 32M*72 PC100 1.15" SHIKATRONICS
VM374S3323-GL ECC SDRAM 256MB 32M*72 PC100 1.15" VIRTIUM
3.3.3.2. DIMM Installation
✎
NOTE
If a Mezzanine card is installed, it must be removed before installation of
DIMMs.
To install the DIMMs in the sockets, proceed as follows:
1. With the board flat on the table, turn it so that the front plate is facing you.
2. Hold the module vertically so that the bottom connector key is at right. Install the
DIMM straight down into the DIMM socket. The socket’s keys will ensure a correct
mating.
3. Press firmly on the top edge of the memory module to engage it into the socket. The
module is fully inserted when the retaining clips snap into notches located at each
end of the module.
If necessary, work your way by inserting the other modules, one by one.
To remove the DIMMs from the sockets, pull simultaneously on the retaining clips located on
each side of the socket. Once the module has snapped out, pull gently on it.