UNPACKING AND SAFETY PRECAUTIONS
Static Electricity
Since static electricity can damage the board, the following precautions should be taken:
1.
Keep the board in its antistatic package, until you are ready to install it.
2.
Touch a grounded surface or wear a grounding wrist strap before removing the board
from its package; this will discharge any static electricity that may have built up in
your body.
3.
Handle the board by the edges.
Storage Environment
Electronic boards are sensitive devices. Do not handle or store devices near strong
electrostatic, electromagnetic, magnetic or radioactive fields.
Power Supply
Before any installation or setup, ensure that the board is unplugged from power sources or
subsystems.
Unpacking
Follow these recommendations while unpacking:
1.
After opening the box, save it and the packing material for possible future shipment.
2.
Remove the board from its antistatic wrapping and place it on a grounded surface.
3.
Inspect the board for damage. If there is any damage, or items are missing, notify
Kontron immediately.
When unpacking you will find:
1.
6U CompactPCI
®
64-bit System Processor board
2.
One Quick Reference sheet
3.
One CDROM containing drivers.
Summary of Contents for cPCI-MXS64GX
Page 70: ...cPCI MXS64GX Technical Reference Manual 3 26 1 Rev...
Page 82: ...4 SOFTWARE SETUPS 1 BIOS SETUP PROGRAM 2 VT100 MODE 4 PART...
Page 108: ...D 1 D BOARD DIAGRAMS D 1 TOP DEVICES SURFACE MOUNT...
Page 109: ...cPCI MXS64GX Technical Reference Manual D 2 D 2 ASSEMBLY BOTTOM DIAGRAM...
