886LCD-M Family
KTD-00474-U
Public User Manual
Date: 2010-06-22 Page
74 of 81
8.6 Security
Menu
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot
Security
Chipset Power Exit
Security Settings
Supervisor Password :Installed
User Password :Installed
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection [Disabled]
Hard Disk Security
Primary Master HDD User Password
Primary Slave HDD User Password
Secondary Slave HDD User Password
Install or Change the
password.
<- Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Feature
Options
Description
Change Supervisor Password
Password
When not cleared the advanced Supervisor
Password protection system is enabled (see
below diagram). Hereafter setting can only be
accessed when entering BIOS as Supervisor.
User Access Level
Full Access
View Only
Limited
No Access
Only visible if Supervisor Password is installed.
Full Access: User can change all BIOS
settings.
View Only: User can only read BIOS settings.
Limited: User can only read settings except:
Date & Time, Quick Boot, Quiet Boot, Repost
Video on S3 Resume, Active State Power-
Management and Remote Access.
No Access: User can not enter BIOS, but if
Password Check = Always then User
password will allow boot.
Change User Password
Password
Change the User Password
Clear User Password
Ok
Cancel
Clears the User Password
Boot Sector Virus Protection
Enabled
Disabled
Will write protect the MBR when the BIOS is
used to access the harddrive
HDD Password
Password
Locks the HDD with a password, the user
needs to type the password on power on
