886LCD-M Family
KTD-00474-U
Public User Manual
Date: 2010-06-22 Page
41 of 81
4.9.2 Ethernet connector 2/3 (ETHER2/3)
The two Ethernet channels in ETHER2/3 are supported by two discrete Ethernet controllers connected to the
onboard PCI bus.
This connector is not supported on the Engineering sample boards
.
The pinout of the RJ45’s connector are as follows:
Signal
PIN
Type
Ioh/Iol
Note
MDI0+
MDI0-
MDI1+
MDI2+
MDI2-
MDI1-
MDI3+
MDI3-
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
MDI0+
MDI0-
MDI1+
MDI2+
MDI2-
MDI1-
MDI3+
MDI3-
Note: The connector has two LEDs which indicates connection and traffic status. The left LED is status for
the ETHER3 (buttom port) and the right LED is for ETHER2. More than one type of connector is approved
for this application. Please notice that it is possible that the shape of the LED might vary depending on actual
type of connector.
