886LCD-M Family
KTD-00474-U
Public User Manual
Date: 2010-06-22 Page
57 of 81
8. BIOS Configuration / Setup
8.1 Introduction
The BIOS Setup is used to view and configure BIOS settings for the 886LCD-M board. The BIOS Setup is
accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the
operating system boot begins. The Menu bar look like this:
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Power Exit
The available keys for the Menu screens are:
Select Menu: <
←
> or <
→
>
Select Item: <
↑
> or <
↓
>
Select Field: <Tab>
Change Field: <+> or <->
Help: <F1>
Save and Exit: <F10>
Exits the Menu: <Esc>
8.2 Main
Menu
BIOS SETUP UTILITY
Main
Advanced PCIPnP Boot Security Chipset Power Exit
System Overview
AMIBIOS
Version : 08.00.10
Build Date: 11/17/08
ID : 886LCD46
PCB ID : 14
Serial # : 00374708
PCB ID : 63650000
Processor
Type : Intel(R) Pentium(R) M Processor 1600 MHz
Speed : 600MHz
System Memory
Size : 1016MB
Speed : 333MHz
System Time [10:18:15]
System Date [Wed 26/11/2008]
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure system Time.
<- Select Screen
|| Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Note on “Speed”: If the actual processor support Speed Step (Pentium M does) then BIOS will run at
minimum Speed until BIOS is almost booted and then speed switch as selected for the “Intel Speed Tech”
setting. Celeron M do not support Speed Step and therefore the Processor Speed will be fixed and identical
to the clock speed listed for the Processor.
Main Menu Selections
You can make the following selections. Use the sub menus for other selections.
Feature
Options
Description
System Time
HH:MM:SS
Set the system time.
System Date
MM/DD/YYYY
Set the system date.
