3.5-SBC-APL – Rev. 0.1
www.kontron.com
// 41
Sub-Screen
Function
Description
Hardware
Health
Configuration
System Fan Speed
Display System Fan Speed
Fan Cruise Control
Disable = Full speed
Thermal = does regulate fan speed
according to specified temperature
Speed = does regulate according to
specified speed
Watchdog Function
0 = Disable. Enter the service interval in
seconds before the system will reset
ITE8528 Firmware Update
This option is enable Auto Update when
version is not match, force update or
disable update EC firmware
PC Speaker/Beep
Control the default beeps during boot of
the system
Thermal
Automatic Thermal Reporting
Configure _CRT, _PSV, _ACO
automatically based on values
recommended in BWG’s Thermal
Reporting for Thermal Management
settings. Set to Disabled for manual
configuration.
Critical Trip Point
This value controls the temperature of
the ACPI Critical Trip Point – the point in
which the OS will shut the system off
Passive Trip point
This value controls the temperature of
the ACPI Passive Trip Point – the point in
which the OS will begin throttling the
processor
Active Trip Point
This value controls the temperature of
the ACPI Active Trip Point – the point in
which the OS will turn the fan on
DPTF
Enable/Disable DPTF
System
Component
OS Reset Select
Select the reset type in FACP table
DDR SSC
Enable DDR Spread Spectrum Clocking
configuration
DDR SSC Selecting Table
Choose the item in SSC selection table
for DDR spread spectrum
DDR Clock Bending Selection Table
Choose for clock bending
HighSpeed SerialIO SSC
Enable HighSpeed SerialIO Spread
Spectrum Clocking configuration
HighSpeed SerialIO SSC Selection T
Choose the item in SSC selection table
for HighSpeed Serial IO spead spectrum
RC ACPI
Settings
Native PCIE Enable
Enable/Disable Native PCIE Enable
Native ASPM
Auto/Enable/Disable Controlled ASPM
RTD3
settings
RTD3 Support
Enable/Disable Runtime D3 support
