3.5-SBC-APL – Rev. 0.1
www.kontron.com
// 38
Sub-Screen
Function
Description
Pending Operation
Schedule an Operation for the Security
Device
Platform Hierarchy
Enable/Disable Platform Hierarchy
Storage Hierarchy
Enable/Disable Storage Hierarchy
Endorsement Hierarchy
Enable/Disable Endorsement Hierarchy
TPM2.0 UEFI Spec Version
Select the TCG2 Spec Version Support,
TCG_1_2: the compatible mode for
win8/win10 TCG_2: Support new TCG2
protocol and event format for win10 or
later
Physical Presence Spec Version
Select to Tell O.S to support PPI Spec
Version 1.2 or 1.3. Note some HCK tests
might not support 1.3
Device Select
TPM 1.2 will restrict support to TPM 1.2
device, TPM 2.0 will restrict support to
TPM 2.0 device, Auto will support both
with the default set to TPM 2.0 devices
if not found,TPM 1.2 will be enumerated
ACPI Settings
Enable ACPI Auto Configuration
Enable/Disable BIOS ACPI Auto
Configuration
Enable Hibernation
Enable/Disable system ability to
Hibernate (OS/S4 Sleep state). This
option may be not effective with some
OS
ACPI Sleep State
Select the Highest ACPI Sleep state the
system will enter when the SUSPEND
button is pressed
LOCK Legacy ressources
Enable/Disable Lock of Legacy
Resources
SMART
Settings
SMART Self Test
Run SMART Self Test on all HDDs during
POST
IT8528 Super
IO
Configuration
Serial Port 1 Configuration Serial Port
Enable/Disable Serial Port (COM)
Device Settings
Display Device Settings
Change Settings
Select an optimal settings for Super IO
Device
Mode
Sets RS485 full mode, RS485 half
duplex mode or RS232
Termination Control
Select COM1 receiver termination
Serial Port 2
Configuration
Serial Port
Enable/Disable Serial Port (COM)
Device Settings
Display Device Settings
Change Settings
Select an optimal settings for Super IO
Device
