Maintenance and Prevention
PxV206 – 2U Platform – User’s Manual
35
To remove the air filter mat located at the front of the system, proceed as follows:
1.
Remove the captive knurled screw of the fan door.
2.
Open the fan door and remove the air filter mat.
3.
To clean the air filter mat:
q
Rinse in water (up to approx. 40°C; you may add mild-duty commercial
detergent).
q
It is also possible to beat it out, vacuum it or blast it with warm
compressed air.
q
If the filter is soiled with greasy dust, you should rinse it with warm water
with degreaser added. Do not clean the filter mat with a piercing jet of
water or wring it out.
4.
After cleaning and drying of the air filter mat, put these over the fans, close
the fan door and tighten the captive knurled screw.
Lithium Battery
The SBC board of your PxV206-2U Platform is equipped with a lithium battery.
Please observe the safety instruction described in the section
„Instructions for the Lithium Battery“.
