Safety Instructions
PxV206 – 2U Platform – User’s Manual
9
Grounding Methods
Guard against electrostatic damage at workstations by following these steps:
1.
Cover workstations with approved anti-static material. Provide a wrist strap
connected to a work surface and properly grounded tools and equipment.
2.
Use anti-static mats, heel straps, or air ionizes to give added protection.
3.
Handle electrostatic-sensitive components, boards, and assemblies by the
case or the PCB edge.
4.
Avoid contact with pins, leads, or circuitry.
5.
Turn off power and input signals before inserting and removing connectors or
test equipment.
6.
Keep work area free of non-conductive materials such as ordinary plastic
assembly aids and Styrofoam.
7.
Use field service tools, such as cutters, screwdrivers, and vacuums that are
conductive.
8.
Always place drives and boards PCB-assembly-side down on the foam.
Instructions for the Lithium Battery
The SBC board is equipped with a Lithium battery. For the replacing of this
battery please observe the instructions described in the SBC board User manual.
The SBC board User manual is included in the delivery.
Warning
Danger of explosion when replacing with wrong type of battery.
