10. AMI BIOS Configuration
PCI-760 – User’s Manual (V1.00)
73
10.7.1.3.
Configure DRAM Timing by SPD
The available settings are:
Enabled
and Disabled.
If the [
Configure DRAM Timing by SPD
] option is set to “disabled” are available additional settings (refer to the
picture below).
10.7.1.4.
DRAM CAS# Latency
Available settings: 3, 4,
5
and 6.
10.7.1.5.
DRAM RAS# to CAS# Delay
Available settings: 3 DRAM Clocks, 4 DRAM Clocks, 5 DRAM Clocks and
6 DRAM Clocks
.
10.7.1.6.
DRAM RAS# Precharge
Available settings: 3 DRAM Clocks, 4 DRAM Clocks, 5 DRAM Clocks and
6 DRAM Clocks
.
10.7.1.7.
DRAM RAS# Activate to Precha
Available settings: 9 DRAM Clocks, 10 DRAM Clocks, 11 DRAM Clocks,
12 DRAM Clocks, 13 DRAM Clocks, 14 DRAM Clocks
and
15 DRAM Clocks
.
10.7.1.8.
Memory Hole
In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped
into the memory space 15MB-16MB.
The available settings are: 15MB-16MB and
Disabled
.
10.7.1.9.
Initiate Graphic Adapter
These settings allow you to select the graphics controller used as primary boot device.The available settings are: IGD,
PCI/IGD
.
PEG
: PCI Express Graphics
PCI
: PCI Device
10.7.1.10.
PEG Port Configuration
PEG Port:
Available settings are: Disabled and
Auto
.
