Kontron Embedded Computers PCI-760 User Manual Download Page 61

Page: 61 / 84

10. AMI BIOS Configuration

PCI-760 – User’s Manual (V1.00)

10.3.9.

MPS Configuration

This field allows you to select which MPS (Multi-Processor Specification) version is used. You have to select the MPS

version supported by your operating system.

Available settings are:

1.4

and 1.1.

10.3.10.

Trusted Computing

10.3.10.1.

TCG/TPM Support

This option allows you to enable or disable the TPM TCG (TPM 1.1/1.2) support in BIOS.

Available settings are:

Yes

and No.

10.3.10.2.

Execute TPM Command

This option allows you to enable (activate), to disable (deactivate) the initialization of the TPM (Trusted Platform Module).

Available settings are:

Don’t change

, Disabled and Enabled.

If the option

[TCG/TPM Support]

is set to “

” the option

[Execute TPM Command]

is not available.

Summary of Contents for PCI-760





















































































Search results

Summary of Contents for PCI-760

Reviews:

Related manuals for PCI-760

Brands by name

Popular brands

Kontron Embedded Computers PCI-760, User Manual

Search results

Summary of Contents for PCI-760

Reviews:

Related manuals for PCI-760

Brands by name

Popular brands