8. Fix the chimney-installation bracket below the ceiling on the wall using the screws
and dowels.
9. Lay the exhaust hose to the wall
outlet. Fix the exhaust hose with the
cable tie (1) on the wall-outlet.
10. Fix the top chimney on the installation bracket (look also on step 8).
11.
Insert the grease filters and connect the appliance to the mains
4
.
Check the correct position of the hood from front and side perspective. Otherwise
the appliance will not work properly.
Carbon filter
Unplug the appliance
before installing the carbon
filter.
For recirculating mode
only.
1
open
2
3
CONTROL PANEL
3
4
If the socket is covered by the chimney, you must plug in the appliance at an earlier
point in
time.
25
