Maintenance, cleaning and repair
u
Maintenance:
Regularly check if the screw connections are tight.
u
Cleaning:
Use a slightly damp cloth to clean the tabletop. Do not use chlorinated
u
or abrasive cleaning agents. These will cause damage to the surface and varnish.
u
Repair:
Immediately repair any damage that occurs and stop using the tabletop.
u
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u
are missing, contact the manufacturer at www.k-m.de. Here you can find a corresponding
u
spare parts list by entering the article number on the type label. Use this page to reorder
u
missing or damaged components.
To rest the tabletop on, the four
safety catches must be "opened". To
do this, press the red button on the
catch. The locking pin snaps back
and the tabletop can be mounted.
Place the tabletop on the support
tubes and lock them with the support
tubes by pressing the locking pins.
Make sure that the locking pins
immerse in the bore holes and lock.
1
PLEASE NOTE:
u
The tabletop must flush at the back with the
u
support tubes. If this is not the case, the
u
tabletop must be rotated by 180°.
u
If the tabletop is used with attachment 18811,
u
the support arms must be mounted in the
u
rear recess
1
.
Flush here
