- 21 -
1. Customers can adjust and set the positions of sun shade travel limit by themselves.
2. According to motor rotating direction
,
adjust the travel limit with the use of the 4mm hex
wrench:the direction of "+" is increasing the travel limit and "-" is to reduce the travel limit .
3.After setting,open and close the awning with the switch and check if the setting is satisfactory.If
not,repeat step 2.
Shade travel limit adjustment
Description of mistake
Warning: When the front bar touches the roller
as shown in the figure, don't try to make them
closer, otherwise the product might be
damaged.
7
1.Always close the awning in windy days, heavy rain and when you are not using it.
2.Please do not unpick and wash the fabric.If you need replace the fabric,pls turn to experts for
help.
3.Check the overall installation and all the fasteners regularly,especially at the beginning of a new
season,to ensure the fasteners are tightened and in good conditions.
4.When maintenance or reparing is made on the electrical parts ,please make sure the awning is
disconnected to the power supply.
Fabric should not be sunken during operation .Otherwise
water will be accumulated on fabric.Please operate in
correct method as shown in above figure.
Warning：
Maintenance
Sun shade projection
limit setting
Sun shade closing
limit setting
White:
Sun shade closing
limit setting
Red:
Sun shade projection
limit setting
09030-BW28000.indd 21
04.10.18 20:09
