- 17 -
5
Check if the awning is level with the use of the spirit
level on the front bar.Adjust the angle adjuster at either
end by loosening the locking nuts of the angle adjuster
,turn the jack bolt to adjust the pitch.Adjust the arm until
the front profile is level.Tighten the locking nuts again
to fix the level of awning.
To adjust the inclination of the awning,adjust the angle
adjuster on both arm shoulders to achieve the desired
inclinaton.Fix the locking nuts when the awning is level.
Operation instructions
Installation of awning to wall brackets
Attach the swing handhook to the gear box ,swirl the handle
to roll and unroll the awning.
Remove the bolts on the front of the wall brackets.Install the awning to the wall brackets by
attaching the square torsion bar to the wall brackets.Lock the awning in place by replacing the
bolts and nuts on wall brackets.Tighten the nuts to ensure the awning is attached to wall
brackets securely.
Open
Close