E-5
(13) Insert the supplied board holder to the DSC
board at the position shown in the illustration.
(14) Set the board holder over the one mounted in
step (9), and screw it.
• C754e/C654e/C754/C654/754e/654e/754/
654: One screw removed in step (7)
• C554e/C454e/C364e/C284e/C224e/C554/
C454/C364/C284/C224/554e/454e/364e/
284e/224e: One supplied shoulder screw
(large)
Note:
• Make sure that the DSC board does not slant.
• If it slants, push it horizontally until it hits
against the end.
(15) Attach the cover removed in step (2) on E-2.
C754e/C654e/C754/C654/C554e/C454e/
C364e/C284e/C224e/754e/654e/754/654/
554e/454e/364e/284e/224e: Six screws
C554/C454/C364/C284/C224: 10 screws
(16) Go to “3. Configuration procedures” on page E-
8.
<Installations to models C368/C308>
(1) Turn OFF the power switch and unplug the
power cord from the power outlet.
(2) Remove the cord clamp if used to secure the
power cord of the main body. (One screw)
(3) Remove the cap.
(4) Remove the lower rear cover. (12 screws)
< C754e/C654e/
C754/C654/754e/
654e/754/654 >