background image

E-1

SC-508 

Security Kit

INSTALLATION MANUAL

A4MM-9552-00

Applied Machines: C754e/C654e/C754/C654/C554e/C454e/C364e/C284e/C224e/C554/C454/C364/C284/C224/

C368/C308/754e/654e/754/654/554e/454e/364e/284e/224e

COLOR MFP: 75 ppm/65 ppm/55 ppm/45 ppm/36 ppm/30 ppm/28 ppm/22 ppm

MFP: 75 ppm/65 ppm/55 ppm/45 ppm/36 ppm/28 ppm/22 ppm

Product Code: A2X0/A2X1/A5AY/A5C0/A5C1/A5C2/A5C4/A2XK/A4FJ/A161/A4FK/A4FM/A7PU/A7PY/A55V/

A5YN/A61D/A61E/A61F/A61G/A61H 

1. Accessory parts

*1

Used only when this option is installed to the 
models C754e/C654e/C754/C654/C554e/
C454e/C364e/C284e/C224e/C554/C454/C364/
C284/C224/754e/654e/754/654/554e/454e/
364e/284e/224e.

*2

One screw is used when this option is installed to 
models C754e/C654e/C754/C654/C554e/
C454e/C364e/C284e/C224e/C554/C454/C364/
C284/C224/754e/654e/754/654/554e/454e/
364e/284e/224e.
Two screws are used when this option is 
installed to C368/C308.

*3

Used only when this option is installed to the 
models C368/C308.

*4

Used only when the Dual Scan Document 
Feeder is installed to the machine.

Note:

    • Two security kits are required for the following 

models, which have the Dual Scan Document 
Feeder.

• C754e/C654e/C754/C654/C554e/C454e/

C554/C454/754e/654e/754/654/554e/454e

• C368/C308 (With DF-704)
• C364e/C284e/C224e/C364/C284/C224/

364e/284e/224e (With DF-701)

    • If none of the later steps instruct you to use the 

parts including screw and cover that you 
removed following the instructions described in 
this manual, discard them.

    • This manual provides the illustrations of the 

accessory parts and machine that may be 
slightly different in shape from yours. In that 
case, instead of the illustrations, use the 
appearance of your machine to follow the 
installation procedure. This does not cause any 
significant change or problem with the proce-
dure.

No.

Name

Shape

Q’ty

1. DSC board

1

2. Board holder 

*1

1

3. Shoulder screw 

(large) 

*2

2

4. Shoulder screw 

(small) 

*3*4

2

5. Screw 

*3

1

6. Gasket 

*3

1

7. Installation 

manual 

1

set

Keep this bag away from babies and 
children. Do not use in cribs, beds, 
carriages, or playpens.

The thin film may cling to nose and 
mouth and prevent breathing. This bag is 
not a toy.

Summary of Contents for SC-508









Reviews: