20
E
NOTE
Using the LCD monitor
1. Turn the camera on by sliding the POWER
switch.
2. Turn the mode dial to the
mode or the
mode.
3. Turn the LCD monitor on by pressing the
DISPLAY button.
4. Compose the picture.
5. Press the shutter button down halfway (the
camera adjusts the exposure and the focus),
then press it the rest of the way down.
While the camera adjusts the exposure and focus, the LED indicator lights
red. After adjusting the exposure and the focus, the LED indicator lights green.
Then press the shutter button the rest of the way down. At that point, the
camera captures an image.
The LED indicator blinks orange while the camera is processing a captured
image.
• The image on the LCD monitor darkens when in strong sunlight or bright light. This is not a
malfunction.
• Using the LCD monitor for an extended period of time may reduce the number of shots that you
can take. To increase the number of shots and conserve battery power, turn the LCD monitor off
and use the viewfinder instead.
The camera is equipped with the
button, al-
lowing the most recent image to be displayed
on the LCD monitor in the
/
mode.
However, you can only view the last image with
this function. To view all your recorded images,
go to the
mode.
If you want to view the image just after taking a
picture, you can press the
button. The last
image will display on the LCD monitor. To return
to the manual record mode/ record mode from
the quick playback status and continue shooting,
press the
button again.
Reviewing the last picture in the record/manual
record mode
