Konica Minolta IP-011, Service Handbook

Page: 10 / 51

1-2 IP-011 PRINTER CONTROLLER
Chapter 1 Overview
Interface: Parallel port
Centronics (IEEE 1284)/Amphenol male 36pin connector
Network interface: (option)
KN-304 network board
Network: Ethernet (100BaseT/10BaseT)
Protocols: IPX/SPX (NetWare), LPD/LPR (TCP/IP),
peer-to-peer (TCP/IP)
Compliant OS:
Windows 95/98
Windows NT 4.0
Windows 2000 (to be supported)
Printer Language:
Destiny: WinStyler Nozomi Ver 2.0
Printer drivers:
Windows 95/98 printer driver
Windows NT printer driver
Host computer: A Windows based computer
Finisher: FS-107
Size: 240 mm(W) x 160 mm(H) x 37 mm(D)
Weight: Approx. 1.1 kg
Power source: 5 V, 2 A or less (supplied from copier)
Operating conditions:temperature: 5-55˚C,
humidity: 5-95%RH (condensation not allowed)
Restrictive Conditions:
•
In the Printer mode, the ECK (Electric Key Counter) of the Konica
7020 series is not available.
•
Although the Weekly Timer function of the Konica 7020 series is
available in the Printer mode, the power is not turned Off until
the data output is finished when print data remains in the E-RDH
Notice: Specifications are subject to change for improvements without no-
tice.