manualshive.com logo in svg

Konica Minolta Image Controller IC-402, User Manual, Page: 69 / 340

Share
Download
Konica Minolta Image Controller IC-402 User Manual Download Page 69

Scanning Documents

2

IC-402

2-34

3

Select the desired destinations, and then touch [OK].

The selected destinations are listed under “Broadcast Destinations”.

4

Touch [Scan Settings], and then specify the scan settings.

–

For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-52.

5

After specifying the settings, touch [OK].

–

To send the data to another destination at the same time, touch 
[Address Book] or [Direct Input] to specify or add other destina-
tions.

–

If a destination registered in a program is added, the scan settings 
registered in the program are given priority, and the scan data is 
sent with the scan settings registered in the program.

Summary of Contents for Image Controller IC-402





















































































































































































































































































































































Reviews:

No comments