manualshive.com logo in svg

Konica Minolta Image Controller IC-402, User Manual, Page: 187 / 340

Share
Download
Konica Minolta Image Controller IC-402 User Manual Download Page 187

Copier Network Functions

6

IC-402

6-16

2

Note 

Be sure to use an authentication method like the one that is used by the 
LDAP server. For details, refer to the manual of the LDAP server being 
used.

“GSS-SPNEGO” is specified as the authentication method when the 
LDAP server uses Active Directory. If “GSS-SPNEGO” is specified, enter 
the domain name for Active Directory.

!

Detail 

Depending on the authentication method, settings for the following pa-
rameters must be set correctly on the Setting Up LDAP screen (6/6) in or-
der to perform the “Check Connection” operation.

For [Simple] and [DIGEST-MD5]: Login Name

For [GSS-SPNEGO] (Active Directory): Login Name and Domain Name

In addition, if the LDAP server uses Active Directory, a DNS server linked 
to Active Directory must be specified from the image controller.

Summary of Contents for Image Controller IC-402





















































































































































































































































































































































Reviews:

No comments