Konica Minolta Image Controller IC-402, User Manual, Page: 182 / 340

Copier Network Functions
6
IC-402 6-11
Setting Up LDAP screen 2/6
Setting Up LDAP screen 3/6
Setting Up LDAP screen 4/6
Item Description
Server Address Sets the IP address of the LDAP server. Use the keyboard
that appears in the touch panel to type in the address (up
to 255 characters).
Search Base Specify the search starting point in the hierarchical
structure that is arranged in the LDAP server. Searchers are
performed by also including the lower sub-directories from
the starting point that was specified. Use the keyboard that
appears in the touch panel to type in the address (up to 255
characters).
Item Description
Enable SSL Sets whether to use SSL (data encryption) when
connecting to the LDAP server. When SSL is used, the
content that is sent is encrypted.
Port No. Sets the port number of the LDAP server. To change the
value, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Port Number (SSL) Specify the port number for using SSL. To change the
value, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Item Description
Authentication Method Select the authentication method used when logging on to
the LDAP server.
[anonymous]: An authentication method that does not re-
quire the user name and password Is specified to [anony-
mous], dynamic authentication is disabled.
[Simple]: A simple authentication method that requires the
user name and password. Take caution since the pass-
words can be leaked over the network.
[Digest-MD5]: An authentication method that can be used
on a typical LDAP server. If authentication fails using Di-
gest-MD5, the authentication is performed by automatical-
ly switching to CRAM-MD5.
[GSS-SPNEGO]: An authentication method that can be
used with Active Directory in Windows (Kerberos authenti-
cation).
[NTLM v1] and [NTLM v2]: An authentication method used
with Windows.