Konica Minolta CM-2600d, Instruction Manual

Page: 67 / 127

E-65
Displaying the Measurement Results
Pass/Fail Judgment
The following screen appears if “PASS/FAIL” has been selected for “DISPLAY” mode and tolerances
have been set.
• When the result is “PASS”
1
Ready to measure.
2
Currently selected <COND
*
> no.
3
Mask/gloss/UV at the time of measurement
4
Currently selected observer/illuminant
5
Currently selected measured data no.
6
Currently selected target color data no.
7
PASS/FAIL judgment result.
8
Measurement date. For the year, only the lower two digits are displayed.
9
Displays the relative gloss value. If the gloss value exceeds 200, the screen will display
“G###” in place of the value.
0
Deletes the currently displayed measured data.
A
Displays other measured data.
B
Switches the screen page from one to another (when there are two pages or more).
C
Switches to the <TARGET> screen for the currently selected no. (T
*
).
D
Outputs the currently displayed measured data to the printer.
E
Returns to the <COND
*
> screen.
F
Appears if there is insufficient battery power when the instrument is powered by the bat-
tery. If
appears, replace the batteries with new ones.
• When the result is “FAIL”