Konica Minolta BIZHUP C351, User Manual

Page: 112 / 318

Setting Up the PCL Driver
5
C351 5-11
Stapling
Multiple-page documents can be stapled.
The staple function is available only when the optional finisher is installed.
1
Click the Setup tab.
2
Select the “Staple” check box.
3
From the drop-down list, specify the number of staples and the sta-
pling position.
2
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
Number of pages that can be stapled when FS-507 is installed: Up to 50
pages on 8-1/2 × 11
w or smaller plain paper, and up to 25 pages on 8-
1/2 × 14 or larger paper. Number of pages that can be stapled when FS-
603 is installed: Up to 50 pages on 8-1/2 × 11
w or smaller plain paper,
and up to 25 pages on 8-1/2 × 14 or larger paper.
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher FS-507 or
FS-603 is installed. When using optional finisher FS-603, the punch kit must
be installed.
1
Click the Setup tab.
2
Select the “Hole-Punch” check box.
3
From the drop-down list, specify the number of punched holes.