1. Type in the IP address of your
device into the address bar of
your web browser.
2. If no authentication is turned on you
will go straight into Public User
mode. You need to login as an
Administrator in order to access the
Authentication settings. To get to
the login screen click on
To Login
Screen
in the top right corner of the
screen and click OK.
3. Once at the login screen select
Administrator and click Login.
You will then be prompted to
enter the device’s administrator
password (See your administrator
for the password).
4. Click on User Authentication /
Account Track
5. Select ON for Account Track and
Password Only for Account Track
Input Method. Click OK and confirm
to proceed when prompted.
6. Click on User/Account Common
Setting. Change Logout
Confirmation Display Setting to
Off. Click OK to save the setting.
7. Go to page 10 of this guide for
instructions on how to add
new accounts using the Web
Connection.
8. Enter the codes into the print
drivers. Printing will not be allowed
without this. (See instructions
starting on page 11).
7
Turning On Account Tracking Using the Web Connection
