Konica Minolta bizhub 4050, User Manual

Page: 51 / 56

4.7 Major messages and actions 4
[Maintenance/Troubleshooting] 4-18
Service call
If a service call has appeared, restart this machine.
If the problem is not resolved after this machine has been restarted, check the displayed trouble code number
and sub code number, then contact your service representative.
[PC-Fax TX Error] An error occurred when PC-Fax
TX data was received on this ma-
chine. This error is remedied automatically.
[Polling RX Error] Multiple destinations have been
specified for Polling RX. Multiple destinations cannot be
specified for Polling RX. Specify only
one destination.
[Counter has reached its
maximum allowance.] The counter has reached the up-
per limit. Delete jobs.
[Job Log Error] The job log storage area on the
HDD is full. Delete job logs.
[Card Authentication Regis-
tration Error] Failed to scan the IC card at the
time of registration. This error is remedied automatically.
[USB Connection Error] The same type of USB device is
connected. Disconnect the USB device.
[Expiration Error] The enhanced server authentica-
tion application has expired. Change to the authentication meth-
od other than the enhanced server
authentication.
[Exceeds the no. of pages
being stapled.] An attempt was made to print
over the maximum number of
sheets of paper that could be
stapled. Cancel the job, or release the staple
setting.
[Extended Authentication
disabled] The enhanced server authentica-
tion application cannot be used. Change to the authentication meth-
od other than the enhanced server
authentication.
Message Description Remedy