Konica Minolta bizhub 181, Quick Manual

Page: 139 / 144

5
Troubleshooting
5-4 bizhub 181
T
rou
ble
sh
ootin
g
Chap
ter 5
Why does the misfeed message remains displayed?
A misfeed may have occurred in a location other than that indicated in the
screen. Recheck locations not indicated in the displayed screen.
Answer
Check for the following.
- Check that no torn paper remains in the part indicated in the screen. If
the paper could not be removed, contact your service representative.
- Open, then close the door indicated in the screen. The message may not
remain displayed after this operation is performed.
2
Reminder
If the misfeed warning remains displayed after the indicated items have
been checked, contact your service representative.
Why did an error message appear?
If the malfunction that occurred cannot be corrected by the user, the mes-
sage “MACHINE TROUBLE SERVICE CALL (C####)” (call service represent-
ative screen) appears.
Normally, a malfunction code beginning with “C” appears in the call service
representative screen.
Answer
When this message appears, turn the machine off, and then wait about 10
seconds before turning it on again.
2
Reminder
If the message remains displayed, note the malfunction code that ap-
peared in the screen, unplug the machine from the electrical outlet, and
then contact the service representative.