SAFETY AND IMPORTANT WARNING ITEMS
S-16
4.4
PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
• When laser protective goggles are to be used, select ones with a lens conforming to the
above specifications.
• When a disassembly job needs to be performed in the laser beam path, such as when
working around the printerhead and PC Drum, be sure first to turn the printer OFF.
• If the job requires that the printer be left ON, take off your watch and ring and wear laser
protective goggles.
• A highly reflective tool can be dangerous if it is brought into the laser beam path. Use
utmost care when handling tools on the user’s premises.
• The Print Head is not to be disassembled or adjusted in the field. Replace the Unit or
Assembly including the Control Board. Therefore, remove the Laser Diode, and do not
perform Control Board trimmer adjustment.
4.5
OTHER PRECAUTIONS
✽
A fuse is installed in each of both L and N lines of the power source of this machine. If the
machine is brought to a stop as a result of the fuse on the N line having been blown for
some reason, there is still the power source voltage being applied to the primary circuit of
the machine. To prevent an electric shock, be sure to unplug the power cord of the
machine before attempting to service the machine.
CAUTION
Double pole / neutral fusing
ATTENTION
Double pôle / fusible sur le neutre.
bizhub_162_210_TO.book 16 ページ ２００５年４月１８日 月曜日 午後１時２７分
