Konica Minolta bizhub 122DN, Service Manual

Page: 28 / 50

Security Function Ver. 1.02 Mar. 2016 8. Service Mode functions
24
8.4 CE Password function
• The CE password function is used to change the CE password to call the Service Mode
to the screen.
8.4.1 S etting the CE password
1. Call the Service Mode to the screen.
See P.8
2. Press the following keys in this order to display the Enhanced Security screen:
Stop
→
0
→
Clear
3. Touch [CE Password].
4. Type the currently used CE password from the keyboard shown on the display and
touch [END].
NOTE
• If there is a mismatch in the CE password between that currently set and that just
entered, the machine displays a message telling that the CE password entered is
wrong. Enter the correct one.
• Each time a wrong CE password is entered, the CE password illegal access count
is incremented by one.
When the access to the
S ervice Mode has been successful with the correct CE
password entered, the CE password illegal access count is cleared and reset to 0.
A7AH S 1E004DA