Konica Minolta accuriopress c6085, Operation Manual

Page: 65 / 81

Automatic Inspection Operation Manual 8-9
8.3 Decoding the Barcode Area or Serial No. (0-9) Area to Check the Contents 8
% You can also select Utility/Counter - [User Setting] - [Common Setting] or Utility/Counter - [Ad-
ministrator Setting] - [Common Setting] to configure the setting.
2
Select [ON] in [Create Auto Inspection Report], and press [OK].
3
Hold a print job for creating a reference image on this machine.
%
When preparing a print job for creating a reference image, select only one set from the repeated
parts.
A to D: Reference image
Gray part: Variable area
This figure shows that inspection is repeated three times every four reference images (A, B, C, and D)
when there are 12 sheets of variable jobs. The inspection repetition count varies depending on the num-
ber of job sheets.
% When printing via the printer driver, change the storage destination in the [Workflow] tab of the PS
Plug-in driver .
% For details on how to hold a job, refer to [Job Management] in the HTML User's Guide.
4
Press [JOB LIST] on the [MACHINE] screen to display the [Hold Job] screen.
1 2 3 4 5 6 7 8 9 10 11 12
1st 2nd 3rd