manualshive.com logo in svg

Konica Minolta 9880, User Manual, Page: 218 / 255

Share
Download
Konica Minolta 9880 User Manual Download Page 218

|

KONICA FAX 9880/9980

218

5

Pull out any paper caught inside the machine.

Fig4_05.eps

6

Pull out the paper tray.

Fig1_07.eps

7

Remove any paper caught in the feeder and any damaged
paper in the tray.

Fig4_06.tif

8

Load the paper tray, making sure the paper is below the
“Paper Full” marking.

9

Slide the paper tray back into the machine until it
latches in place.

10 Place the image drum unit back into the machine.

!

WARNING: Always hold the image drum unit by the
ends. Never touch the surface of the green drum inside
the image drum cartridge.

11 Close the cover to the image drum compartment,

pushing down on it until both latches catch.

12 Return the document tray to the working position.

13 Turn the power switch back on.

1

Summary of Contents for 9880
































































































































































































































































Reviews:

No comments