Seatex XPR 100
Procedure
1
Insert the USB flash drive into the USB port at the front of the Processing Unit.
2
Select the
System menu
button in the upper right corner of the
Main
view.
3
Select the
Settings
submenu
→Tools →SW Update
to open the
SW update
dialog box.
4
select
Install
.
The software updated will start. The Processing Unit will automatically restart
when the update procedure is finished.
Related topics
•
on page 33
Checking the product version
For software update or contact with customer support it is useful to know the product
version of the system.
Procedure
1
Select the
System
menu
→Settings →About
.
2
Observe the XPR system software version and the software version.
3
Select
Details
to show detailed information about the system. Such as serial
numbers, Sensor Unit software version etc.
4
Close the page to return to the
Main
view.
Related topics
•
on page 28
Periodic maintenance
Some activities should be carried out on a regular basis to maintain the condition or
operational status of the equipment.
Cleaning of Processing Unit air inlet
The air inlet at the rear of the Processing Unit needs to be cleaned regularly to avoid
overheating of the unit. The period between each cleaning is dependent on the air quality
at the installation site. However, we recommend that the filter should be cleaned at
least every six months.
Remove the plastic cover and replace the filter or clean the filter either by washing
with mild detergent or vacuuming.
40
XPR-D-User/1.0
Summary of Contents for XPR 100
Page 1: ...Operator Manual XPR 100 Long Range Relative Positioning System...
Page 2: ......
Page 48: ...2019 Kongsberg Seatex...
