Kongsberg XPR 100, Operator'S Manual

Page: 11 / 48

XPR 100
are responsible for obtaining such a license prior to switching the product ON. It may be
required to switch the product OFF when the product is brought close to shore (closer
than 12 NM).
Possible radio frequency interference
This equipment generates, uses and can radiate radio frequency energy. If the equipment
is not installed and used in accordance with the instructions, it may cause harmful
interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation.
You can determine if the equipment causes harmful interference by turning the
equipment off and on.
If this equipment causes harmful interference to radio or television reception, you can try
to correct the interference by one or more of these measures.
• Reposition or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from the one to which the
receiver is connected.
• Consult the manufacturer or dealer for help.
Network security
Equipment manufactured by Kongsberg Seatex AS is frequently connected to local
area networks (LAN). Connecting any computer to a network will always expose the
data on that computer to all other computers connected to the same network. Several
threats may immediately occur:
• Remote computers can read the data.
• Remote computers can change the data.
• Remote computers can change the behaviour of the computer, for example by
installing unwanted software.
Usually, two parameters are used to define the threat level:
1 The likelihood that any remote connection will do any of the above.
2
The damage done if a remote connection succeeds doing this.
Because Kongsberg Seatex AS has no information regarding the complete system
installation at a location, we can not estimate the threat level and the need for network
security. For this reason, we can not accept responsibility for network security. Systems
provided by Kongsberg Seatex AS are regarded as stand-alone offline systems, even
though they may be connected to a network for sensor interfaces and/or data distribution.
XPR-D-User/1.0
9