Maintenance
About maintenance
The XPR system consists of both software and hardware. The software part can be
reinstalled or updated to the latest version in the field by loading a software update
into the Processing Unit.
Service of the XPR hardware in the field can consist of:
• replacing damaged cables and/or connectors
• replacing Sensor and/or Processing Unit
• checking the fuse:
– within the power connector on the Processing Unit
The Processing Unit and the Sensor Unit are not designed for service in the field and
opening the housing will result in damage or degradation of the units and void the
warranty. Damaged units have to be shipped back to Kongsberg Seatex AS for repair.
Note
Preferably equipment should be returned in its original package. Units containing
lithium batteries shall be returned in the original package with the proper labelling.
During the time a damaged unit is in for service, Kongsberg Seatex AS will assist the
user by renting a spare component if needed.
For replacement procedures, see the
XPR Installation Manual
for installation of the
respective units.
Updating the system software
We recommend that you keep your product updated with the latest software version.
Prerequisite
A USB flash drive with the software update package has been received from Kongsberg
Seatex AS.
XPR-D-User/1.0
39
Summary of Contents for XPR 100
Page 1: ...Operator Manual XPR 100 Long Range Relative Positioning System...
Page 2: ......
Page 48: ...2019 Kongsberg Seatex...
