Kongsberg Simrad TV80, Reference Manual

Page: 58 / 356

56
406388/F
Setting up the TV80 Catch Monitoring
Software for the first time
Topics
Setting up summary, page 56
Defining the IP address on the computer's network adapter, page 58
Installing the TV80 operating software, page 59
Obtaining and installing the software license, page 60
Starting the TV80 program, page 61
Setting up the SR15 Receiver Unit on an Ethernet (LAN) port, page 62
Setting up the SR70 Receiver Unit on an Ethernet (LAN) port, page 63
Setting up the PI50 and PI60 Receiver Units on a serial line input, page 64
Defining the serial line communication parameters for the PI50 and PI60 Receiver
Units, page 66
Defining receiver parameters for the PI50 and PI60 Receiver Units, page 67
Selecting gear, page 68
Adding new catch monitoring sensors, page 52
Creating views to see the data provided by the sensors, page 71
Inspecting the quality of the reception, page 77
Setting up summary
Before a new TV80 system can provide any information you must set it up. You
must first install the software. In order to add one or more catch monitoring sensors
to your system, you must first connect the necessary receiver unit(s), and define the
communication parameters. Finally, you must set up the communication parameters for
your navigation sensors.
Prerequisites
• All system units have been installed.
• All cable connections have been made and checked.
• All system units have been inspected.
• The operational software is available.
• The software license is available.
Simrad TV80 Reference Manual