12
401063/I
h
Close File Explorer.
i
Remove the USB flash drive.
5
On the Processor Unit desktop, double-click the SU90 icon to start the program.
6
If applicable: Disconnect the keyboard and the mouse from the Processor Unit.
Settings you need to restore after a software
upgrade
Due to the multiple softeware changes made to the SU90 system, certain settings must be
restored after the software upgrade.
Note
You only need to restore these settings if you are upgrading from software version 3.1.8.
Colour scales
In the
Colour Setup
dialog box, all existing user settings will for
Echo Colours
will
revert to
Normsl
. If you have user settings with other settings you need to load
these user settings, change
Echo Colours
from
Normal
to your own preference. To
keep the same name for the user setting, just delete it first and save with old name.
Mode Selection on Operating Panel page
The default value for this setting is now to change presentation modes. If you still
wish to use the buttons to select user settings you must activate this by deselecting
. The old user settings will still be there.
Configuration of Operating Panel Mk1
The Mk1 Operating Panel uses serial line COM1 to communicate with the
Processor Unit. This setting must be reconfigured after the software upgrade.
Simrad SU90 Software Release Note
