Kongsberg SIMRAD HT20470, Installation Manual

Page: 41 / 50

492671/C
39
About the drawings in the drawing file
Relevant drawings related to installation and/or maintenance are provided for information
purposes only.
Note
These drawings are provided only for information and planning purposes. Information may
be omitted. Observe the source drawings for additional details.
The drawings are not to scale. Unless otherwise specified, all measurements are in
millimetres. The original installation drawings are available in PDF and/or AutoCad's DWG
format. The original drawing can be downloaded from our website.
• https://www.kongsberg.com/fisherysonar
Some drawings and documents are not available from our website. These can be downloaded
from the
Simrad Dealer Club .
• www.kongsberg.com/sdc
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, all documents provided by the shipyard for the physical installation of the
sonar system must be approved by the vessel’s national registry and corresponding
maritime authority and/or classification society. Such approval must be obtained before the
installation can begin. The shipowner and shipyard doing the installation are responsible
for obtaining and paying for such approval.
Drawing file